 |
 |
 |
|
The Xantrex Freedom XC 1000 Inverter/Charger offers premium performance in a lightweight compact package. This inverter/charger provides up to 1000 watts of continuous utility grade, sine wave power from a battery bank, and is designed to handle loads such as microwave ovens, TVs, DVD/Blu-ray players, and power tools. In addition, the Freedom XC 1000's extended 2-second high-surge capability lets you handle many hard-to-start loads, including full-size residential refrigerators.
When AC power is available, the Freedom XC 1000 can operate as a 12 Volt battery charger. Different battery types and chemistries require different charging voltage levels, and not charging batteries at the required levels can shorten battery life or damage the batteries. The Freedom XC 1000 is configured at the factory with optimized charging algorithms to work with the battery types recommended for inverter applications. If the default settings do not work for your specific installation, you can adjust the charge stage settings through the inverter/charger's custom battery settings menu.
The Freedom XC 1000 also has a built-in 30 Amp transfer switch that automatically transfers between inverter power and shore power from recreational facilities such as boat docks or campsites to ensure power is always available. If incoming shore power is interrupted by external events like brownouts, the Freedom XC 1000 automatically becomes an independent power source that supplies utility-grade AC power to your loads.
The Freedom XC 1000 offers comprehensive built-in protection features to safeguard your batteries from unnecessary drain while protecting your equipment. Features include selectable low battery shutdown voltage, low voltage shutdown delay timer, power save mode, low battery voltage alarm, and shutdown. The Freedom XC 1000 also features configurable AC transfer speed, output frequency, and voltage, making it extremely versatile.
| Inverter Specifications | | | Input | | 12 VDC | | Output voltage | | 120 VAC, 60 Hz | | Continuous power | | 1000 W (8.4 A) | | Surge power | | 2000 W (16.8 A), 2 Seconds | | Output waveform | | Pure sine wave | | Transfer relay | | 30A | | | | Charger Specifications | | | Input | | 120 VAC, 60 Hz | | Output Current | | 5-55 ADC, user selectable | | Output voltage | | 18 VDC maximum | | | | General Specifications | | | Dimensions | | 14.2 x 10.6 x 3.7 in (360 x 270 x 95 mm) | | Inverter weight | | 13.4 lbs (6.1 kg) | | Shipping weight | | 16.0 lbs (7.3 kg) | | Warranty | | 2 years |
See spec sheet for additional info
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Product Features- 1,000 watts continuous power output
- 2,000 watts surge (peak power)
- Extended 2 second surge for motor loads
- True sine wave output for sensitive electronics and motors
- Configurable AC output frequency and voltage
- Built-in automatic 3-stage temperature compensated battery charger with optimized charging algorithms
- Programmable Smart Battery Management logic to facilitate extended battery use & life
- Built-in 30 Amp transfer relay
- AC hardwire or plug directly into the optional 20A GFCI receptacle
- Easy access AC & DC wiring compartment with quick connect terminals for easy installation
- Digital display for viewing AC & battery current
- Power share feature to prioritize AC loads
- Configurable ignition lockout feature helps to minimize battery drain
- Full output from -4°F - 104°F for operation in all climate temperatures
- ETL listed to CSA 107.1
- UL458 and UL458 Marine Supplement (drip shield with product number 808-1050 required)
- ABYC E11, A20, A25 and A31
Protection Features- Battery low-voltage protection (user selectable from 10.5 to 12.8 VDC)
- Battery over-voltage protection
- Automatic overload protection
- Over-temperature shutdown
- Short-circuit protection
- Ground-fault protection
Available Accessories
|
|
|
|
|
|
|
