 |
 |
 |
|
The Magnum Energy MSH4024M is a 4000 Watt "Hybrid" Pure Sine Wave Inverter/Charger designed especially for rugged mobile applications (i.e., trucks, RVs and boats). Powerful, yet simple to use, this inverter/charger will provide you with years of trouble-free performance you have come to expect from Magnum Energy.
Why is the Magnum MSH4024M is a "Hybrid"? Most inverters only use one source of energy to power the inverter loads—either from the incoming AC power (i.e., shorepower or generator) or from the batteries. The MSH4024M combines the energy from both the AC input and the batteries to power the inverter loads. This feature gives the inverter the ability to recharge the battery when there is surplus power, or to deliver more power to the loads if they require more than the AC input can supply by itself.
Using the ME-RC or ME-ARC Remote Controls, easily choose from and set standard battery profiles, including Lithium Iron Phosphate (LFP) – only available via the ME-RC, Gel, Flooded, AGM1, and AGM2.
The MSH4024M has a neutral ground switching and is intended to be used for land vehicles (RVs or trucks) or marine craft. Additionally, it has been tested and listed to UL 458, 5th Edition for use in the US; and is also certified to CSA C22.2 No. 107.1-01 for use in Canada.
Inverter Specifications
|
| | Input | 24 VDC
| Output voltage
| 120 VAC, 60 Hz
| Continuous Power
| 4000 VA (33.3 A)
| Surge Power (5 sec)
| 5800 W (48.3 A)
| Output waveform
| Pure sine wave
| Transfer relay
| 60 A
|
|
| Charger Specifications
|
| Input
| 120 VAC, 60 Hz
| Output Current
| 110 ADC
| Output voltage
| 24 VDC
| Dimensions
| 13.8 x 12.7 x 8.0 in (349 x 321 x 203 mm)
| | Inverter weight | 55.0 lbs (24.9 kg)
| | Shipping weight | 62.0 lbs (28.1 kg)
| | Warranty | 3 years
|
See spec sheet for additional info
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Product Features- Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Load support: Load support parallels the inverter output with incoming AC sources allowing it to run larger loads from smaller generators.
- Easy-to-install: Install the MSH-M Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your utility power cable to the inverter's easy-to-reach terminal block, connect the batteries, and switch on the power.
- Choices: The MSH-M Series comes in 12 and 24 volt configurations, allowing you to choose the model that is right for you.
- Interchangeable: The MSH-M is interchangeable with the Magnum MS Series and uses the same accessories as the MS Series.
- Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple ports: The MSH-M Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
- Convenient switches: The MSH-M Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Buy with ease: The MSH-M Series is backed by a three-year (36-month) limited warranty.
Available Accessories- Advanced Remote Control (ME-ARC50). This advanced feature remote offers the same simple push button operation of the ME-RC50 with advanced features and setup menus.
- Automatic Generator Start (ME-AGS-N). Automatically starts and stops a generator as needed.
- Battery Monitor Kit (ME-BMK). Acts as a "fuel gauge" for your batteries, it monitors your batteries stage of charge and then provides information via Magnum Energy remote control.
- Web Monitoring Kit (ME-MW-W). The.MagWeb is a power and cost effective tool for remotely monitoring Magnum Energy's inverters and accessories via wireless internet.
|
|
|
|
|
|
|
